Nowadays, for soil stabilisation and cleaner production of geo-composites, the possibility of utilizing waste rubber is in vogue. The present paper deals with experimentally investigating the mechanical and microstructural characteristics of weak Indian clayey soil partially substituted with lime (0-3.5%) and waste rubber tyre powder (0-15%). It was observed that, with increasing lime and rubber powder content, the plasticity index of the soil decreases. The shear strength and compaction testing results reveal that adding lime and rubber tyre powder (RTP) enhances the geotechnical performance of clayey soil up to an optimum dosage value. Also, the triaxial shear testing was performed to obtain stress-strain curves for all considered soil mixes. For modified clayey soil containing 3% lime and 12.5% rubber powder, the cohesion values and bearing capacities improved phenomenally by 36.1% and 88.6% respectively, when compared to clayey soil. Further for this mix, SEM analysis reveals a compacted microstructure which improves dry-density and California's bearing ratio among all modified mixes. The novel co-relations upon regression analysis are found able to predict plasticity index, dry density, bearing capacity and shear strength with higher confidence levels. Overall, the cost-benefit analysis worked out to obtain the optimum cost of construction of footings and flexible pavement shows cost deductions up to 19% and 39% respectively while utilizing modified clay soil mixes containing 3% lime and 12.5% rubber powder in subgrade, ultimately making production stronger, cheaper and environment friendly.

The aim of this study is to investigate the properties of biodegradable plantable pots made from biomaterials. Specifically, rapeseed straw and cow manure biomaterials were studied here because these biomaterials add nutrients to the soil during their biodegradation and are readily available agricultural by-products. Furthermore, the use of biomaterials helps in replacing the plastic materials which are currently used to make pots and decreases the environmental impact by producing a cleaner product. The physical and mechanical properties of biocomposites pots were investigated and optimized in the present work. The effect of mixing ratio (straw: cow manure) in the composite, straw particle size, and chemical pre-treatments of straw by 1% HCl or 2% NaOH on the physical and mechanical properties of biodegradable pots was investigated. Additionally, the Taguchi method and ANOVA statistical analyses were employed for parameters optimization. The results indicated the straw to cow manure ratio exhibited a significant effect on the compression strength (CS), penetration strength (PS), and water absorption (WA) of pots. While the CS and PS of pots decreased with increasing the ratio of straw from 2 to 10% and increasing the particle size of straw from 1.5 to 3.0 mm, these changes increased the water absorption of pots (126.52-141.21% for 1.5-mm untreated straw). Chemical pre-treatments of straw investigated here resulted in decreased CS and PS of pots. The straw ratio in the straw/manure mixture is the most significant factor affecting the characteristics of biodegradable pots.