Copper smelting slag (CSS) are waste slag obtained from smelters after reusing sulphur smelting slag. This study explores the potential of CSS to serve as a resource in cement mortar construction. Specifically, the study investigates the use of mechanical and chemical methods to enhance the volcanic ash activity of CSS, enabling them to replace up to 30 % of the cement content in cement mortar. The modified CSS was analyzed in terms of particle size and (Toxicity Characteristic Leaching Procedure) TCLP testing, while cement mortar specimens were subjected to a battery of tests including compressive strength, Freeze-thaw experiment, TCLP testing and cement stability testing. The results showed that compared with the unmodified CSS material, the copper smelting slag cement material with CaCO3 3 meets the requirements of GB/T 1596-2017 on the standard compressive strength of OPC 42.5 grade, with a compressive strength of 38.88 MPa at 10 % CaCO3 3 admixture, among which the CSS cement material with 10 % CaCO3 3 is the best and meets the leaching toxicity standard. Moreover, the modified CSS reduced energy consumption by 7.15 %, CO2 2 emissions by 27.41 %, and cost by 19.84 %. XRD, FTIR and SEM analysis showed that the mechanical activation of CaCO3 3 doping more drastically damaged the crystal structure of CSS, and local lattice distortion occurred, which induced the transformation of CSS from crystalline phase to amorphous phase and destroyed the ordered structure of minerals, resulting in the volcanic ash activity increased. Overall, this study demonstrates that CSS can serve as a viable raw material in cement mortar samples, reducing environmental impact and achieving resourceful use of slag.