This paper investigated the influence of chloride ion erosion and aftershocks on the seismic performance of transmission tower structures in Xinjiang, China. Based on chloride ion diffusion laws and steel corrosion mechanisms, the time-dependent deterioration of reinforced concrete was analyzed. Finite element models considering corrosion effects were established for different ages(0a,50a,70a,100a) in a saline soil environment using ANSYS/LS-DYNA. Ten mainshock-aftershock sequences tailored to the site type was constructed, and the cumulative damage index (DI) was adopted as a metric for structural damage. The results indicate that aftershocks and steel corrosion significantly impact transmission tower damage, with damage extent influenced by the intensity of the main shock. Stronger aftershocks cause greater additional damage, potentially exceeding 50 % cumulative damage when their amplitude matches the main shock. Steel corrosion alone can lead to nearly 40 % damage. Its influence on seismic fragility varies with damage state, especially under moderate to complete damage, where longer service life increases vulnerability. The coupling of corrosion and aftershocks further elevates structural vulnerability. Hence, in seismic assessments of transmission towers in saline soil environments, combined effects of main and aftershocks, and corrosion, must be accounted for.

Over the past few decades, engineering research has increasingly focused on the reliability assessment of transport infrastructures and their critical components when faced with multiple natural hazards. This trend stems from recognizing the substantial direct and indirect economic losses associated with infrastructure damage and the resulting downtime. The increasing frequency of intense hazard occurrences, as a consequence of climate change, coupled with the time-intensive nature of post-event bridge inspections, highlights the need for an efficient approach to assess bridge fragility to hazards that occur either as single abrupt events or in compounds, i.e., multiple hazard perturbations or combined incremental deterioration. This approach should account for the order of hazards and the accumulation of damage to bridge components. Within this context, we introduce an analytical method for evaluating the fragility of bridges affected by independent or multiple successive and independent natural hazards. The proposed method is demonstrated through a case study in which a riverine bridge is evaluated considering different sequences of hazards. Initially, the fragility of the bridge under individual hazards, such as earthquakes or floods, is calculated. Subsequently, multi-hazard fragility curves are constructed to capture the combined effects of these events. This approach is a comprehensive method for generating fragility curves for bridges, considering all structural components involved in the resisting system of the structure. These curves are based on a detailed estimation of thresholds for different limit states, encompassing multiple failure modes and accounting for soil-structure interaction (SSI) effects. The method employs a probabilistic framework to manage uncertainties in both the demand on the structure and its capacity to withstand single hazards. The framework is extended to include scenarios involving multiple hazards that occur separately or in series, emphasizing how cumulative damage influences the overall bridge fragility. The findings indicate a significant increase in the probability of damage for all the limit states examined, underscoring the importance of considering the cumulative effect of multiple hazards in the fragility analysis of bridges. The fragility models can be used in life-cycle risk assessment of aging bridges exposed to multiple hazards to inform decision-making and prioritization of investments for risk mitigation and climate adaptation.

Dynamic load on anchoring structures (AS) within deep roadways can result in cumulative damage and failure. This study develops an experimental device designed to test AS under triaxial loads. The device enables the investigation of the mechanical response, failure mode, instability assessment criteria, and anchorage effect of AS subjected to combined cyclic dynamic-static triaxial stress paths. The results show that the peak bearing strength is positively correlated with the anchoring matrix strength, anchorage length, and edgewise compressive strength. The bearing capacity decreases significantly when the anchorage direction is severely inclined. The free face failure modes are typically transverse cracking, concave fracturing, V-shaped slipping and detachment, and spallation detachment. Besides, when the anchoring matrix strength and the anchorage length decrease while the edgewise compressive strength, loading rate, and anchorage inclination angle increase, the failure intensity rises. Instability is determined by a negative tangent modulus of the displacement-strength curve or the continued deformation increase against the general downward trend. Under cyclic loads, the driving force that breaks the rock mass along the normal vector and the rigidity of the AS are the two factors that determine roadway stability. Finally, a control measure for surrounding rock stability is proposed to reduce the internal driving force via a pressure relief method and improve the rigidity of the AS by full-length anchorage and grouting modification. (c) 2024 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/ licenses/by-nc-nd/4.0/).