Soil moisture detection research, which influences crop growth, land use, and soil erosion, is receiving significant attention. This study proposes a nondestructive, integrated ultrawideband (UWB)-based framework for soil moisture measurement and prediction. The method utilizes a UWB-loaded unmanned aerial vehicle (UAV) to gather radar echo data, circumventing soil damage issues inherent in current research and equipment. We first employ time-frequency analysis methods to convert the echo signals into 2-D spectrograms, constructing datasets labeled with soil moisture. Then, a trained neural network is used to predict the soil moisture at single point. Additionally, a novel interpolation method is proposed to enhance prediction accuracy (ACC) for the ridge-furrow structure of farmland. The experimental results demonstrate that the proposed algorithm achieves a soil moisture measurement ACC of 98% in both vegetated and nonvegetated conditions, indicating strong robustness. In terms of moisture distribution prediction, the mean squared error (mse) of soil moisture spatial distribution prediction is reduced by 42% compared to traditional methods. Therefore, this system provides technical support for efficient, large-scale, and nondestructive soil information collection.

The Qilian Mountains, located on the northeastern edge of the Qinghai-Tibet Plateau, are characterized by unique high-altitude and cold-climate terrain, where permafrost and seasonally frozen ground are extensively distributed. In recent years, with global warming and increasing precipitation on the Qinghai-Tibet Plateau, permafrost degradation has become severe, further exacerbating the fragility of the ecological environment. Therefore, timely research on surface deformation and the freeze-thaw patterns of alpine permafrost in the Qilian Mountains is imperative. This study employs Sentinel-1A SAR data and the SBAS-InSAR technique to monitor surface deformation in the alpine permafrost regions of the Qilian Mountains from 2017 to 2023. A method for spatiotemporal interpolation of ascending and descending orbit results is proposed to calculate two-dimensional surface deformation fields further. Moreover, by constructing a dynamic periodic deformation model, the study more accurately summarizes the regular changes in permafrost freeze-thaw and the trends in seasonal deformation amplitudes. The results indicate that the surface deformation time series in both vertical and east-west directions obtained using this method show significant improvements in accuracy over the initial data, allowing for a more precise reflection of the dynamic processes of surface deformation in the study area. Subsidence is predominant in permafrost areas, while uplift mainly occurs in seasonally frozen ground areas near lakes and streams. The average vertical deformation rate is 1.56 mm/a, with seasonal amplitudes reaching 35 mm. Topographical (elevation; slope gradient; aspect) and climatic factors (temperature; soil moisture; precipitation) play key roles in deformation patterns. The deformation of permafrost follows five distinct phases: summer thawing; warm-season stability; frost heave; winter cooling; and spring thawing. This study enhances our understanding of permafrost deformation characteristics in high-latitude and high-altitude regions, providing a reference for preventing geological disasters in the Qinghai-Tibet Plateau area and offering theoretical guidance for regional ecological environmental protection and infrastructure safety.

Research on soil contamination has become increasingly important, but there is limited information about where to sample for pollutants. Thus, the use of three-dimensional (3D) spatial interpolation techniques has been promoted in this area of study. However, the application of traditional interpolation methods is limited in geography, especially in the expression of anisotropy, and it is not associated with geographical properties. To address this issue, we used a test site (a factory in Nanjing) to develop a new research method based on the geographical shading radial basis function (RBF) interpolation method, which considers 3D anisotropy and geographical attribute expression. Drilling and uniform sampling were used to sample the contaminated area at this test site. This approach included two steps: i) An ellipsoid with anisotropic properties was constructed. Thus, the first step was to determine the shape of the ellipsoid using principal component analysis (PCA) to determine the main orientations and construct a rotational and stretched matrix. The second step was determining the ellipsoid size by computing the range using the variogram method for orientations. ii) During field measurement, the geospatial direction influences soil attribute values, so a shadowing calculation method was derived for quadratic weight determination. Then, the weight of the attribute value of known points can be assigned to meet the field conditions. Lastly, the model was evaluated using the root mean square error (RMSE). For the 2D space, the RMSE values of Kriging, RBF, and the proposed method are 6.09, 7.12, and 5.02, respectively. The R2 values of Kriging, RBF, and the proposed method are 0.871, 0.832, and 0.946, respectively. For the 3D space, the RMSE values of Kriging, RBF, and the proposed method are 2.65, 2.23, and 2.58, respectively. The R2 values of Kriging, RBF, and the proposed method are 0.934, 0.912, and 0.953, respectively. The resulting fitted model was relatively smooth and met experimental needs. Thus, we believe that the interpolation method can be applied as a new method to predict the distribution of soil pollutants.

Computed tomography (CT) is an effective technique for characterizing the internal structure of soil. However, the voxels in CT images obtained by majority of medical scanners exhibit anisotropy, i.e., the resolution in the vertical direction is lower compared to the horizontal direction, which can have adverse effects on the characterization of soil morphological parameters and the quality of three-dimensional reconstructed images. Currently, existing interpolation methods for achieving voxel isotropy in soil CT images are unable to generate high -quality interpolation images at arbitrary positions between two slices, which leads to errors in the analysis of soil structure. Therefore, this study proposed an inter -layer interpolation method (APFlowNet) based on convolutional neural network (CNN) and bidirectional optical flow to generate high -quality images with isotropic voxels and assist in digital soil descriptions. The proposed method utilized an estimated image synthesis module to extract bidirectional optical flow between two input images and estimate optical flows from the input image to arbitrary interpolation positions, enabling the acquisition of overall continuous change. Subsequently, the intermediate image synthesis module was employed to extract the residual stream and its corresponding weights, facilitating the capture of detailed changes. Finally, the interpolation image synthesis module integrated the global and detail information to produce a high -precision interpolation image with isotropic voxels. Compared to the best -performing Linear method in traditional approaches, the APFlowNet method demonstrates superior performance with a peak signal-to-noise ratio (PSNR) of 32.637 dB and a structural similarity index (SSIM) of 0.928, representing improvements of 1.97% and 0.43%, respectively. This study showcased that the APFlowNet method not only increases the number of soil CT images but also achieves voxel isotropy, providing an intelligent technique for comprehending the internal structure of soil and multi -scale modeling.

A traditional grid model for soil sampling may suffer from poor efficiency and low accuracy. With a nonferrous metal processing plant as the study area, a three-dimensional kriging interpolation model was built based on this plant's preliminary investigation data for arsenic (As), and a detailed survey sampling programme was proposed. The sampling density at the pollution interval of the surface soil was estimated by the coefficient of variation method, and the sampling depth was determined by the pollution interval of the vertical prediction results. The results showed that the encrypted soil sampling distribution optimisation method obtains greater pointing accuracy with fewer points. The sampling accuracy was 87.62% after optimising the depth of pointing. Moreover, this approach could save 66.13% of the sampling costs and 56.93% of the testing costs compared to a full deployment programme. This study provides a new and cost-effective method for predicting the extent of contamination exceedance at a site and provides valuable information to guide post-remediation strategies for contaminated sites.