This study investigates the seismic performance of a theoretical hospital building designed as a Fixed-Base (FB) structure according to TSC-2018 (Turkish Seismic Code) and evaluates its behavior under three scenarios: FixedBase (FB), Soil-Structure Interaction (SSI), and Base-Isolated (SSI+ISO). The study employs Nonlinear Time History Analysis (NLTHA) using scaled acceleration records, including one from the 2023 Maras, earthquake. Structural performance is assessed based on maximum roof displacements, interstory drift ratios (IDR), and isolator displacements. Results show that base isolation systems significantly reduce drift demands and roof displacements, keeping the structure within slight damage limits even under extreme seismic loads. In contrast, SSI effects amplify interstory drift demands, increasing the likelihood of exceeding moderate damage thresholds. The analysis highlights the Maras, Education and Research Hospital, which suffered severe damage and became non-operational during the 2023 Kahramanmaras earthquake. This outcome underscores the limitations of fixedbase designs in regions with soft soil conditions and the necessity of incorporating base isolation systems to improve seismic resilience. The findings emphasize the importance of mandatory adoption of base isolation systems in hospital designs, proper consideration of SSI effects, and the retrofitting of existing hospital buildings to meet modern seismic code requirements (TSC-2018) and prevent similar failures in future seismic events.

The current study assesses the effectiveness of supplementary bio-inspired devices (BIDs) in mitigating seismic impact on resilient base-isolated structures. Initially, rigid base-isolated structures with these devices are analyzed under stationary white-noise earthquake excitation using an equivalent linearization technique, accounting for non-linear force-deformation characteristics. Performance indicators such as added stiffness, damping, and overall response mitigation are evaluated. The investigation extends to flexible base-isolated buildings subjected to filtered white-noise excitation, observing the devices' effectiveness in controlling the displacement of the isolation system. Optimal values for the limiting force of the BIDs are identified, minimizing RMS topmost floor acceleration. The findings consistently illustrate the ability of BIDs to control isolator displacement even in the challenging conditions of near-fault motions. Importantly, the results align well with the trends observed under stochastic excitation, highlighting the robustness and potential applicability of BIDs in enhancing the seismic resilience of structures. These insights contribute significantly to advancing seismic engineering practices and offer valuable implications for the development of structural control.

Pile-Supported Wharves (PSW) are critical for maritime operations but are highly vulnerable to seismic events, which can disrupt port activities. Previous seismic events have highlighted that short free length piles in wharf structures are particularly prone to earthquake damage. This paper aims to mitigate damage between the wharf deck and piles connections by adopting the seismic isolation systems. Conventional Wharf (CW) and Isolated Wharf (IW) structures were comprehensively assessed, focusing on Pile-Soil Interaction (PSI), using the finite element software OpenSees for advanced numerical simulations. Non-Linear Time History Analysis (NLTHA) of CW and IW has been conducted to verify the design under Contingency Level Earthquake (CLE) and Maximum Considered Earthquake (MCE) scenarios. The analysis aims to enhance the performance of short free length piles within the IW structure. Comparative analysis of fragility curves between CW and IW structures shows that isolation systems significantly reduce seismic fragility by 49%, 60%, and 67% at the MCE level for minimal damage, control & repairable damage and life safety protection across three performance levels, respectively. These findings indicate that the implementation of isolation measures has significantly enhanced the seismic performance and safety of PSW structures.

Electric transformers are major components of electrical systems, and damage to them caused by earthquakes can result in significant financial loss. The current study modeled a three-dimensional (3D) isolated electrical transformer under horizontal and vertical records from different earthquakes. Instead of using fixed coefficients, an improved wavelet method has been used to create the greatest compatibility between the response spectra and the target spectrum. This method has primarily been used for dynamic analysis of isolated structures with spring-damper devices because it has shown greater accuracy in predicting the response of such structures. The effect of the nonlinear soil-structure interaction on the probability of transformer failure also has been investigated. Soil and structure interaction modeling was carried out using a beam on a nonlinear Winkler foundation. The effect of the nonlinear soil-structure interaction during dynamic analysis of transformers revealed that the greatest increase in the probability of transformer failure was in the fixed-base condition when the structure was located on soft soil. This intensified the response of the structure and increased the probability of transformer failure by up to 27% for far-field and up to 95% for near-field ground motions. A comparison of the results indicates that the use of 3D isolation systems in transformers in areas with soft clay that are subject to near-field ground motions can strongly reduce the probability of failure and improve the seismic performance of the transformer.