Recently, the biostimulation has received attention due to its sustained mineralization, environmental adaptability and lower cost. In the current study, a series of isotropic consolidated undrained triaxial shear (CU) tests were performed on biocemented soil treated through biostimulation approach to examine the effect of cementation levels on the undrained shear behaviors. The test results demonstrate that the biocementation generated by the biostimulation approach can improve the shear behaviors remarkably, with the observed changes in stress-strain relationship, pore water pressure, stress path, stiffness development, and strength parameters. The variations of the strength parameters, i.e., effective cohesion and effective critical state friction angle, with increasing cementation treatment cycles can be well fitted by an exponential function and a linear function, respectively, while the variation of the effective peak-state friction angle is relatively small. The increased shear strength, stiffness, effective cohesion, and strain softening phenomenon of biocemented soils are related to the densification, increased particle surface roughness, and raised interparticle bonding caused by biostimulation approach. The liquefaction index decreases with the increase in cementation treatment cycles, especially at lower initial mean effective stress (100 and 200 kPa), indicating that the biostimulation approach may be a viable method for anti-liquefaction of soil.

Microbially induced calcite precipitation (MICP) is a promising technology for soil improvement, where the treated soil can be regarded as the structural one. In this study, a micromechanics-based model is proposed to investigate the mechanical behaviors of inherently anisotropic MICP-cemented sand, which consists of a hexagonal close-packed (HCP) particle assembly (2D) composed of bonded elliptical particles with same size. A size-dependent bond failure criterion is adopted to define the microscopic mechanical reactions between the particles to model the nonlinear characteristics of the soil. Based on the homogenization theory and lattice model, the stress-strain relationship, strength criteria, and corresponding macroscopic mechanical parameters with respect to microscopic parameters for MICP-cemented sand are derived and verified by DEM simulation based on the regularly arranged particle assembly. The effects of key parameters, including cement content, initial void ratio, inherent anisotropy, and confining pressure, on the mechanical behaviors of MICP-cemented sand is investigated in detail, and the good agreement between the theoretical solution and laboratory test results validates the applicability of the theoretical solution for analyzing MICP-cemented sand.

The application of microorganisms to improve the mechanical properties of soil is a new developing research area. A new native bacteria extracted from soil was introduced for the biological improvement of soil geotechnical parameters. The isolate was identified as Acinetobacter calcoaceticus S1. Sporosarcina pasteurii was used as a positive control. Direct shear tests were performed on the nontreated soil and soils treated with bacteria to determine the shear strength, adhesion and angle of internal friction. The treatment period was 40 days. The shear wave velocity was measured.The results showed that the untreated sample had relatively constant shear strength, but the shear strength of the treated soils increased significantly. The soil treated with A. calcoaceticus had greater shear strength. The angle of internal friction increased for the treated soils with A. calcoaceticus (39.3%) and S. pasteurii (28.6%). The greatest cohesion was found for soil treated with A. calcoaceticus, reaching 0.66 and 0.56 kg/cm2 for S. pasteurii. The shear wave velocity in the treated soils increased significantly. The results confirmed the ability of native A. calcoaceticus to improve soil geotechnical parameters. Calcium carbonate precipitation fills the voids between soil particles and forms a gel, which makes effective connections between soil particles and makes them coalesce and grow larger.

Microbially Induced Calcite Precipitation (MICP) is an eco-friendly method for improving sandy soils, relying on micro-organisms that require nitrogen and essential nutrients to induce carbonate mineral precipitation. Given the substantial annual generation of chicken manure (CM) and the associated challenges in its disposal resulting in environmental pollution, the nutrient-rich composted form of this waste material is proposed in this study as a supplementary additive (along with more costly industrial reagents, e.g., urea) to provide the necessary carbon and nitrogen for the MICP process. To this end, different CM contents (5 %, 10 %, and 15 %) along with various concentrations of cementation solution (1 M, 1.5 M, and 2 M) are employed in multiple improvement cycles to augment the efficiency of the MICP technique. Unconfined Compressive Strength (UCS), Ultrasonic Pulse Velocity (UPV), and Water Absorption (WA) tests are performed to assess the mechanical properties of the samples before and after exposure to freeze-thaw (F-T) cycles, while SEM, XRD, and FTIR analyses are carried out to delineate the formation of calcite within the porous structure of MICP-CM-treated sands. The findings suggest that an optimum percentage of CM (10 %) in the MICP process not only contributes to environmental conservation but also significantly enhances all the mechanical properties of bio-cemented sandy soils due to markedly improved bonding within their porous fabric. The results also show that although prolonged exposure to consecutive F-T cycles causes a reduction in strength and stiffness of enhanced MICP-treated soils, the mechanical properties of such geo-composites still remain within an acceptable range for optimal CM-enhanced biocemented mixtures, significantly superior to those of MICP-treated sands.

Rammed earth, a commonly used building material in ancient times, differs from natural sedimentary layers in that it is more compact. Buildings constructed from historical rammed earth sites frequently encounter the issue of rainwater erosion. Microbially induced calcium carbonate precipitation (MICP) is commonly applied to sand soil treatment, yet reports on its use for stabilizing rammed earth are scarce. This study focused on the rammed earth of the Shanhaiguan Great Wall and explored the efficacy of MICP in mitigating rain erosion through permeation tests, splash experiments, and scouring trials. The findings indicate that the forms of rain erosion damage under MICP treatment vary across different operational conditions. In laboratory experiments, as the concentration of the cementation solution increases, the amount of calcium carbonate crystals also increases. However, the permeability, splash resistance, and rain erosion resistance initially increase and then decrease. When the cementation solution concentration is 1.0 mol/L, the penetration rate is the highest, lasting 712.55 s. The splash pit rate is the lowest, at only 1.2 mm, and the soil erosion rate is the lowest, at only 4.13%. The rain erosion resistance in the field test exhibit the same trend, and the optimal concentration is 1.2 mol/L. The optimal concentration mechanism involves the aggregation of calcium carbonate crystals at suitable cementation solution concentrations, which begin to fill the soil particle pores, effectively resisting rainwater erosion. At lower concentrations of the cementation solution, calcium carbonate crystals are merely adsorbed by soil particles without blocking the pores. Due to the high compressibility of rammed earth, which results in lower porosity, a higher concentration of the cementation solution leads to rapid pore clogging by excessive calcium carbonate crystals, which accumulate on the surface to form a white crust layer. The MICP technique can effectively alleviate rainwater erosion in rammed earth, and the optimal concentration needs to be tailored to the porosity of the rammed earth. This mechanism was also validated in field scouring experiments on the Shanhaiguan Great Wall's rammed earth.

In coastal areas, built structures encounter hostile conditions and forces that can cause them to deteriorate over time owing to saltwater exposure, tidal forces, reinforcement corrosion, and freeze-thaw cycles. Early age cracks in such structures accelerate the rate of deterioration, and the current research focuses on alleviating such threats. This paper evaluates the performance of a self-healing mortar made by encapsulating expanded perlite with the bacterium Halobacillus Halophilus MCC2188. Mortar cube specimens of size 70.6 mm x 70.6 mmx 70.6 mm were prepared with cement: fine aggregate in 1:3 ratios. A 10% volume of the fine aggregate fraction was substituted with the expanded perlite immobilised with bacterial spores and nutrients. The expanded perlite aggregates were coated with sodium silicate and cement solution to protect the spores from the nonconducive environment. The specimens were subjected to fully and partially submerged marine water curing. The mechanical properties and self-healing potential were evaluated, and the precipitated polymorphs in completely healed cracks were identified and examined by characterisation techniques such as XRD, FEGSEM, FTIR, and TGA-DTG. The marine bacterium under investigation can tolerate the high salt concentrations commonly found in seawater and saline marshy soil and produce calcite through the metabolism of organic compounds, making it a suitable microorganism for self-healing applications. Crack widths of up to 0.84 mm and 92.79% average strength recovery were achieved in 56 days post-cracking, and the pace of healing was quicker in partially submerged curing conditions. The results showed improved self-healing, strength regain and mechanical strength and proved to be an efficient tool for enhancing the endurance of biomortar in severe marine exposure conditions.