In light of the growing plastic waste problem worldwide, including in agriculture, this study focuses on the usefulness of both conventional, non-degradable plastics and environmentally friendly bioplastics in the agricultural sector. Although conventional plastic products are still essential in modern, even ecological agriculture, the increasing contamination by these materials, especially in a fragmented form, highlights the urgent need to search for alternative, easily biodegradable materials that could replace the non-degradable ones. According to the literature, polymers are widely used in agriculture for the preparation of agrochemicals (mostly fertilizers) with prolonged release. They also play a role as functional polymers against pests, serve as very useful super absorbents of water to improve crop health under drought conditions, and are commonly used as mulching films, membranes, mats, non-woven fabrics, protective nets, seed coatings, agrochemical packaging, or greenhouse coverings. This widespread application leads to the uncontrolled contamination of soil with disintegrated polymeric materials. Therefore, this study highlights the possible applications of bio-based materials as alternatives to conventional polyolefins or other environmentally persistent polymers. Bio-based polymers align with the strategy of innovative agricultural advancements, leading to more productive farming by reducing plastic contamination and adverse ecotoxicological impacts on aquatic and terrestrial organisms. On the other hand, advanced polymer membranes act as catching agents for agrochemicals, protecting against environmental intoxication. The global versatility of polymer applications in agriculture will not permit the elimination of already existing technologies involving polymers in the near future. However, in line with ecological trends in modern agriculture, more green polymers should be employed in this sector. Moreover, we highlight that more comprehensive legislative work on these aspects should be undertaken at the European Union level to guarantee environmental and climate protection. From the EU legislation point of view, the implementation of a unified, legally binding system on applications of bio-based, biodegradable, and compostable plastics should be a priority to be addressed. In this respect, the EU already demonstrates an initial action plan. Unfortunately, these are still projected directions for future EU policy, which require in-depth analysis.

In this study, the base film (CSL) was prepared by blending tunicate cellulose nanocrystals (TCNCs) extracted from tunicate shells, with sodium alginate (SA) and alkali lignin (AL). Then, the mulching film (CSL-WK) was prepared using water-borne polyurethane (WPU) as binder to install low-energy Kaolin on the surface of CSL film. The influences of composition with different concentrations on mechanical properties were studied. The tensile strength and elongation at break of CSL-WK film could reach 86.58 MPa and 50.49 %, respectively. The mulching films were characterized by degradability test, SEM, FTIR, and TGA. TCNCs had good compatibility with SA and AL, and a rough structure was formed on the surface of the film to improve the hydrophobicity. The barrier properties, including ultraviolet resistance, water contact angle, water vapor permeability, water retention, and flame retardancy, were tested. The results showed that CSL-WK films could block 97 % of ultraviolet light, reduce about 25 % of soil water loss, and self-extinguish within 7 s of open flame ignition. Note that the secondary spraying method significantly improved the barrier property of films. This study lays a foundation for the preparation of ecologically friendly, biodegradable, and high barrier mulching film, and expands the application of marine resources.