Civil engineering structures made upon expansive soils known in India as Black Cotton (BC) soils are susceptible to structural damages due to their seasonal swell-and-shrink behaviour. This study focuses on assessing the mechanical performance of BC soil stabilised using unconventional binders, specifically Sugarcane Bagasse Ash (SCBA) and Ground Granulated Blast Furnace Slag (GGBS) with different proportions. The experimental evaluation included Compaction tests, Unconfined Compressive Strength (UCS) tests, Triaxial tests, and Atterberg's limits tests. Additionally, mineralogical and morphological studies were carried out using x-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive x-ray spectroscopy (EDS), and chemical analysis using x-ray fluorescence spectroscopy analysis (XRF). The results showed that the mixture containing 21% SCBA and 9% GGBS produced cementitious-siliceous-hydrate (C-S-H) molecule, which improved the strength. Based on the soil-binder percentage ratio obtained from UCS tests, a regression equation was developed to estimate consolidated soil strength. The regression model, exhibiting an impressive R2 value of 93.69%, was analysed within the framework of existing empirical correlations by other researchers. This statistical model, with its good fit, is a useful tool for evaluating the compressive strength of stabilised expansive soil. The findings provide insights into successful stabilisation solutions for expansive soils found locally and globally.

Sugarcane bagasse ash is a kind of agricultural waste with a large quantity and good volcanic ash reactivity, it is necessary to find a way to reasonably utilize it to prevent environmental pollution caused by long-term accumulation. In this paper, the effect of sugarcane bagasse ash on the short-term mechanical properties of coastal cement soil were studied, and unconfined compressive tests and triaxial shear tests were carried out. The sugarcane bagasse ash content was set to 0 %, 1 %, 2 %, 3 %, 4 % and 5 %, respectively, the cement content was set to 5 %, and the curing age was set at 7d. The test results show that sugarcane bagasse ash can effectively improve the unconfined compressive strength and triaxial shear strength of cement soil, exhibiting a trend of increasing first and then decreasing with the increase of its content. When the sugarcane bagasse ash content is 1 %, the unconfined compressive strength reaches the maximum value of 2040 kPa, which is 56 % and 8 % higher than that of cement soil with 5 % and 7 % cement content, respectively. Compared with cement soil with 5 % cement content, the triaxial shear strength increases by 12 %similar to 17 %, the internal friction angle phi and cohesion c increases by 3 %similar to 8 % and 2 %similar to 11 %, respectively. The SEM test results show that the addition of bagasse ash can promote the hydration of cement to produce hydrated calcium silicate and other hydration products, fill the internal pores of the sample, and make the microstructure of the modified cement soil tend to be dense. The research results provide a reference for the application of sugarcane bagasse ash modified cement soil in practical engineering.

Expansive soils can cause large-scale damage to the infrastructure. Soil stabilization with Portland cement and lime has been widely utilized as a solution to this problem. However, these stabilizers are non-renewable and energy-intensive. Alkali-activated binders are alternatives with lower carbon dioxide emissions. This research evaluated an expansive soil stabilization with an alkali-activated binder produced from sugarcane bagasse ash (SCBA), hydrated eggshell lime (HEL) and sodium hydroxide (NaOH). Free-swelling tests alongside a statistical analysis evaluated the influence of dry unit weight (12.5 and 14.5 kN/m(3)), binder (4 and 10%) and moisture content (19.7 and 24.7%) and curing time (0 and 7 days) on the stabilized mixtures. A four factors factorial design with duplicates and central points was outlined. To better understand the NaOH and SCBA influence over the soil expansion additional tests were performed. In general, an increase on the studied factors reduced swelling, especially binder content. However, the alkali-activated cement presented no clear correlation between higher density and higher expansion. Swell reduced from 13.8% (12.5 kN/m(3) and 19.7% moisture) and 8.8% (12.5 kN/m(3) and 24.7% moisture) to 2.5% and 0%, respectively, after 7 days and 10% binder addition for the alkaline cement. For Portland cement, swell reduced from 13.8% (10.2 kN/m(3) and 22.5% moisture) and 12.5% (10.2 kN/m(3) and 27.5% moisture) to 1.8% and 1%, respectively, after 7 days and 4% binder addition. Samples containing NaOH expanded less than samples molded with only water. Finally, the alternative binder might be a viable option to replace Portland cement for expansion control.

Soft to medium clay soil possesses major sources of damages to the pavement layers overlying them because of their potential failure under moisture changes and external heavy traffic load. In such situations, soil stabilization methods can be used to improve the soil properties and satisfy the desired engineering requirements. This study presents the use of sugarcane bagasse ash (SBA) and lime as chemical stabilizers for a clay soil subbase. Sugarcane bagasse ash and lime are used individually and as mixtures at varying percentages to stabilize a clay soil from Taxila, Pakistan. Various geotechnical laboratory tests such as Atterberg limits, compaction test, and California Bearing Ratio (CBR) are carried out on both pure and stabilized soils. These tests are performed at 2.5%, 5%, and 7.5% of either SBA or lime by weight of dry soil. In addition, mixtures of lime and SBA in ratios of 1:1, 2:1, 3:1, 1:2, and 1:3 are used in 5%, 7.5%, and 10% of dry soil weight, respectively. Results indicate that soil improved with 7.5% SBA showed a 28% increase in the liquid limit, while soil mixed with 2.5% lime in combination with 7.5% SBA showed an increase of 40% in the plastic limit. For the plasticity index, the soil mixed with 7.5% SBA showed an increase of 42%. Moreover, 2.5% lime in combination with 2.5% SBA showed the best improvement in soil consistency as this mixture reduced the soil plasticity from high to low according to the plasticity chart. Furthermore, 2.5% SBA in combination with 5% lime demonstrated the largest improvement on the CBR value, which is about a 69% increase above that of the pure soil. Finally, the cost analysis indicates a promising improvement method that reduces pavement cost, increases design life, and mitigates issues of energy consumption and pollution related to SBA as a solid waste material.