共检索到 1

The practice of widening levees to mitigate frequent river flooding is globally prevalent. This paper addresses the pressing issue of sand-filled widened levee failures under the combined effect of heavy rainfall and high riverine water levels, as commonly observed in practice. The primary objective is to illuminate the triggering mechanism and characteristics of such levee failures using the well-designed physical model experiment and Material Point Method (MPM), thus guiding practical implementations. Experimentally, the macro-instability of the levee, manifested as slope failure within the sand-filled widened section, is primarily triggered by changes in the stress regime near the levee toe and continuous creep deformation. Upon failure initiation, the levee slope experiences a progressive failure mode, starting with local sliding, followed by global sliding, and ultimately transitioning into a flow-like behaviour, which characterises the slide-to-flow failure pattern. The slope failure along the interface between the original and new levees is the result of shear deformation rather than the cause. Parametric studies conducted using the calibrated MPM model reveal a critical threshold for the widening width, beyond which the volume of sliding mass and travel angle exhibit no further variation. Increasing the cohesion of the river sand used for levee widening demonstrates the most pronounced improvement in levee stability in the face of the combined effect of intense rainfall and elevated river levels. The MPM-based evaluation of common slope protection measures demonstrates the superior protective benefits of grouting reinforcement and impervious armour layer protection, providing valuable insights for reinforcement strategies in levee engineering applications.

期刊论文 2025-08-01 DOI: 10.1016/j.compgeo.2025.107259 ISSN: 0266-352X
  • 首页
  • 1
  • 末页
  • 跳转
当前展示1-1条  共1条,1页