There are a vast number of large-scale ancient landslides in the east Tibetan plateau. However, these landslides have experienced reactivation in recent years and resulted in increasingly serious casualties and economic losses. To study the reactivation mechanism and early identification of ancient landslides on the eastern margin of the Tibetan Plateau, high-resolution remote-sensing interpretation, field survey, interferometric synthetic aperture radar (InSAR) monitoring, laboratory and in situ geotechnical tests, physical modeling tests, and numerical simulations were used, and the main results obtained are as follows. The development and distribution of ancient landslides on the eastern margin of the Tibetan Plateau were clarified, and an efficient identification method was proposed. Reactivation characteristics, triggering factors, and typical genesis patterns were analyzed. Second, the macroscopic mechanical properties of gravelly slip-zone soil and their strength evolution mechanisms at the mesoscale were revealed, and then the strength criterion of gravelly slip-zone soil is improved. Third, combined with typical cases, the reactivation mechanism of ancient landslides under different conditions is simulated and analyzed, and a multistage dynamic evolution model for the reactivation of ancient landslides is established by considering key factors such as geomorphic evolution, coupled endogenic and exogenic geological processes. Finally, an early identification method for ancient landslide reactivation was proposed, enabling rapid determination of the evolutionary stage of ancient landslide reactivation. These findings provide new theoretical and technical support for effectively preventing the risk of reactivation disasters of ancient landslides on the Tibetan Plateau.

Ancient landslides tend to reactivate along pre-existing slip zones that have reached a residual state. On the eastern margin of the Tibetan Plateau, previous research has indicated that the slip zone of ancient landslides is primarily composed of clayey soil with gravel, known as gravelly slip zone soil. However, the relationship between the macromechanical behavior of gravelly slip zones and the mesostructure of the shear surfaces affected by gravel is still unclear. Herein, ring shear tests and reversal direct shear tests were performed on gravelly slip zone soil, and the 3D morphology and shear surface roughness were quantitatively characterized by using 3D laser scanning technology and the power spectral density method. The results showed a significant correlation between the friction coefficient of the shear surface and its roughness. Gravel played a crucial role in influencing the macromechanical behavior of slip zones by altering the mesomorphology of the shear surfaces. By analyzing the mechanical properties of the contact unit on the shear surface, the residual strength of the gravelly slip zone was found to be jointly controlled by the basic strength of the fine-grained soil and the undulations caused by the gravel. Finally, a residual strength model was developed for the gravelly slip zone considering both the strength of the fine-grained soil and the shear surface roughness caused by the gravel. The reactivation of ancient landslides has caused serious casualties and economic losses. Field investigations have revealed that the slip zones of ancient landslides commonly contain gravel. However, we still have limited knowledge regarding the effects of gravel on the behavior of slip zones. We carried out shear tests on gravelly slip zone soils and quantitatively characterized the shear surface morphology. Our results showed a strong correlation between the friction coefficient of the shear surface and its roughness. We found that the presence of gravel significantly influenced the macromechanical behavior of the slip zone by altering the mesostructure of the shear surface. Based on our findings, we developed a residual strength model for the gravelly slip zone that considers both the strength of the fine-grained soil and the roughness of the shear surface caused by the gravel. Our study provides valuable insights into the behavior of ancient landslides along pre-existing slip zones and improves our understanding of the role of gravel in influencing their macromechanical behavior. The friction coefficient of the slip zone is positively correlated with the shear surface roughness The gravel controls the macromechanical behavior of the slip zone by altering the morphology of the shear surface A residual strength model for the gravelly slip zone soil considering the shear surface roughness caused by gravel is proposed