Heavy metal ions, such as Cd, Hg, Pb, and As, tend to persist in soil without natural degradation and can be absorbed by crops, leading to the accumulation of agricultural products that pose a significant threat to human health. However, the development of a rapid and efficient technique for identifying heavy metals in agricultural products is essential to ensure health and safety. With the knowledge of the extent of damage caused by heavy metals, it becomes imperative to detect the presence of cadmium in the soil, water, and the environment. This study introduces a novel plate approach for quick and precise colorimetric detection of cadmium ions using the Cd(II)-Chrome Azurol S CAS-2,2 '-dipyridyl dipy-Cetylpyridinium Bromide CPB quaternary complex. Our innovative method has shown that at a reaction solution pH of 11, the optimal concentration ratio is CAS (5 x 10-3 M): dipy (0.1 M): CPB (1.0 x 10-3 M) = 4 mL: 1 mL: 1 mL. The most significant fading alert was observed when the ethylenediaminetetraacetic acid (EDTA) chelator was added dropwise to the CAS detection plate, indicating strong chelation of Cd by EDTA. This laboratory-based study established a foundation for future applications in real environmental sample analysis.

The discharge of heavy metals (HMS) from industrial production has severely damaged the natural environment and human health. To address the challenges posed by heavy metals, a novel almond shell biochar (FeSCTS@nBC) modified with FeS and chitosan (CTS) was prepared. Scanning electron microscopy and X-ray photoelectron spectroscopy observations revealed a uniform distribution of FeS particles on the biochar. Adsorption thermodynamics experiments showed that the maximum adsorbed amounts of cadmium (Cd), lead (Pb), and chromium (Cr (VI) and Cr (III)) in FeS-CTS@nBC were 85.6, 89.63, 94.2, and 75.62 mg/g, respectively. Results of soil incubation experiments indicated that FeS-CTS@nBC had a desirable immobilization effect on heavy metals, decreasing the bioavailability of Cd, Pb, Cr (VI), and Cr (III) by 29.43%, 23.93%, 5.75% and 5.23 %, respectively. Density functional theory (DFT) calculations, revealed that the oxygen-containing functional groups on the biochar exhibited stronger adsorption capacities for heavy metals. Plant potting experiments indicated that the paddy grew well in the soil remediated with FeS-CTS@nBC. The Cd content in the roots and leaves of the paddy after nBCS2 repair was reduced by 28.01 % and 55.73 %, respectively. Overall, this work provides a promising low-cost method with a simple production process for mitigation of heavy metals from water and soil.

Rapid urbanization and industrial growth in China have increased brownfield site reclamation, the sustainable remediation for urban transformation and enhancing ecosystem services. However, traditional brownfield safety assessment strategies impose unnecessary costs since excessive remediation. Herein, a comprehensive system integrated by soil self-purification, potential ecological risks and human health risks is developed to investigate the safety of brownfield sites. Indices, including soil environmental loading capacity (SELC), and Nemerow integrated pollution index (NIPI), were introduced to assess heavy metals (HMs) pollution. Results show that 72.05% of the sites are identified as moderate pollution, where Cd, As, and Cr(VI) are at heavy pollution, incorporating soil self-purification. The average values of potential ecological risk (PERI) reached 6615.00, posing a significant damage to the local ecosystem, and Cd was identified as main ecological hazards in the study sites. Furthermore, the health risk assessment shows that children's health risks are higher than that of adults, with non-carcinogenic risk to children (2.60) and adults (0.41), and carcinogenic risk to children (2.30 x 10-3) and adults (1.12 x 10-4). Utilizing a multi-index decision-making approach, it is determined that 19.30% of the site exhibit high-risk values, between concentration screening (11.40%) and risk screening (83.30%) base on single-indices. The study sheds light on the comprehensive assessment of brownfield site safety.

Heavy metals (HMs) contamination poses a significant threat to environmental matrices, particularly soil, which is essential for food security, agricultural productivity, and key ecosystem services. Understanding how crops respond to HMs is crucial for developing biomonitoring strategies to assess soil contamination and inform remediation efforts. Plants, including crops, exhibit a range of functional traits (FT) that can indicate HMs stress and contamination levels. In this study, we investigated the response strategies of Zea mays L. var. Limagrain 31455, widely cultivated throughout the region of Land of Fires, a critically polluted area of southern Italy, to different concentrations of Zn, Pb, and Cr, corresponding to moderate to severe soil contamination. Functional traits related to the photosynthetic machinery, including gas exchange, chlorophyll fluorescence and reflectance indices, were examined. Root morpho-histochemical analysis were also conducted to correlate early root alterations with any observed changes in these photosynthetic traits. Results revealed distinct response patterns: tolerance to Zn, without adverse effects on photosynthetic traits; resistance to Pb, mediated by increased RD and photoprotection through change in reflectance indices; and sensitivity to Cr highlighted by severe functional impairments of all the studied photosynthetic traits and structural root damages. Functional traits, such as chlorophyll fluorescence parameters and the photochemical reflectance index or normalized difference vegetation index, demonstrated high potential for monitoring HMs stress responses; in addition, morpho-anatomical traits of the root system provided insights into biomass allocation and the capacity of var. Limagrain 31455 to tolerate and adapt to HMs stress. These findings underscore the importance of integrating physiological, anatomical, and spectral analyses to improve the biomonitoring and management of polluted soils and detecting spatial variability in contamination via remote sensing.

Industrial development has caused significant environmental damage, especially through potentially toxic element (PTE) pollution. Combining pollution indices, health risk assessment, spatial autocorrelation (Moran's I), and receptor modeling (APCS/MLR), this study quantified sources and risks of heavy metals in smelting-adjacent farmland soils, facilitating targeted PTE pollution mitigation. Soil analysis revealed significantly elevated mean concentrations of As (326 mg/kg), Cd (23 mg/kg), Cr (104 mg/kg), Cu (106 mg/kg), Ni (73 mg/kg), Pb (274 mg/kg), and Zn (660 mg/kg), all exceeding Yunnan provincial background values. The average total non-carcinogenic risk index (HIadult = 2, HIchild = 11) and total carcinogenic risk index (TCRadult = 5.52 x 10-4, TCRChild = 6.44 x 10-4) for both adults and children exceeded the threshold (HI = 1, TCR = 1 x 10-04). The results of environmental pollution evaluation show that the overall pollution in the study area is a heavy pollution level. The ACPS-MLR model showed that Cd and Zn in soil mainly came from industrial activities (37%). Cu and Pb were derived from motor vehicle emissions and agricultural activities (20%). As may be derived from agricultural and industrial activities. Furthermore, based on the combination of source apportionalization and the spatial distribution of environmental pollution, the northeastern part of the study area and transportation hubs are the key pollution areas and need to be given priority for treatment. PTEs accumulate in the soil, will be enriched through the food chain, and seriously threaten human health and soil ecological environment. Therefore, this study can provide a basis for identifying, preventing, and controlling the risk of PTEs pollution in soil.

Heavy metals (HMs) contamination is a major issue produced by industrial and mining processes, among other human activities. The capacity of fungi to eliminate HMs from the environment has drawn attention. However, the main process by which fungi protect the environment against the damaging effects of these HMs, such as cadmium (Cd), is still unknown. In this study, some fungi were isolated from HMs-polluted soil. The minimum inhibitory concentrations (MICs) and the tolerance indices of the tested isolates against Cd were evaluated. Moreover, molecular identification of the most tolerant fungal isolates (Aspergillus niger and A. terreus) was done and deposited in the GenBank NCBI database. The results showed that the colony diameter of A. niger and A. terreus was decreased gradually by the increase of Cd concentration. Also, all the tested parameters were influenced by Cd concentration. Lipid peroxidation (MDA content) was progressively increased by 12.95-105.95% (A. niger) and 17.27-85.38% (A. terreus), respectively, from 50 to 200 mg/L. PPO, APX, and POD enzymes were elevated in the presence of Cd, thus illustrating the appearance of an oxidative stress action. Compared to the non-stressed A. niger, the POD and PPO activities were enhanced by 92.00 and 104.24% at 200 mg/L Cd. Also, APX activity was increased by 58.12% at 200 mg/L. Removal efficiency and microbial accumulation capacities of A. niger and A. terreus have also been assessed. Production of succinic and malic acids by A. niger and A. terreus was increased in response to 200 mg/L Cd, in contrast to their controls (Cd-free), as revealed by HPLC analysis. These findings helped us to suggest A. niger and A. terreus as the potential mycoremediation microbes that alleviate Cd contamination. We can learn more about these fungal isolates' resistance mechanisms against different HMs through further studies.

The leaching of excessive heavy metals (HMs) from lithium slag (LS) presents a significant challenge for its use in road engineering, necessitating the development of safe treatment methods. This study employed solidification/ stabilization (S/S) technology to develop a magnesium slag-lithium slag composite solidified material (MS-LS). The deformation and displacement characteristics of MS-LS during destruction were analyzed using digital image correlation (DIC). Various microscopic analytical techniques were used to analyze the stabilization mechanisms of MS-LS towards HMs. Results indicated that adding MS significantly improved the compressive strength and resistance to cracking of MS-LS. The minimum strength of the 8 %-MS group reached 2.7 MPa, meeting the strength requirements for subgrade stabilized soil in a first-class highway under heavy traffic load conditions. The development of strength is attributed to improved structural compactness from particle micro-gradation effects and the cementitious hardening action of C-S-H gel. HMs immobilization was achieved through directional adsorption at active sites within the calcium-rich mineral phase and interlayer adsorption within the C-S-H gel, complemented by a physical encapsulation mechanism that reduces HMs leaching. The immobilization rates of Be(II) and Pb(II) in the 8 %-MS group exceeded 95 %, demonstrating the effectiveness of MS in stabilizing these HMs in LS.

The environment has been damaged due to anthropogenic activities related to the production and consumption of cattle. The present study investigated the pollution potentials of slaughterhouse effluents on groundwater qualities in Ebonyi State Southeast Nigeria, with the specific objectives to determine the effect of slaughterhouse effluents on both microbiological, physicochemical and heavy metal parameters on the quality of groundwater. Eighty-four well water samples were taken in 2022 and 2023 from slaughterhouse locations, and a control location for the determination of physicochemical properties and microbiological contents using standard analytical methods. Datasets were analyzed using Fisher's Significance Least Difference (F-LSD) at 0.05 probability level. The study recorded higher levels of physicochemical, BOD, COD, Salinity, bacterial and fungal counts in the slaughterhouses well waters when compared to the control well water. With the exception of chloride, ammonia, copper and electrical conductivity, all water parameters were significant in both years. The result of the study also demonstrated that, with the exception of ammonia, lead, biological oxygen demand, chemical oxygen demand, salinity, salmonella spp, shigella spp, E. coli, and other coliforms, the majority of the analysed parameters were within the World Health Organisation recommended standard. In addition, as compared to the first year of study, the well water parameters were generally higher in the second year. In order to prevent groundwater pollution, the present study suggests that slaughterhouse effluents be disposed of in an environmentally responsible manner through the segregation of waste materials to prevent groundwater pollution.

The problem of chemical soil pollution after military actions on the territory of Ukraine is becoming quite urgent in terms of ecological risks. The aim of the article was to establish the level of ecological safety of soils after the application of biosorption technology and to substantiate its ecological and economic feasibility. Within the scope of the study, three scenarios were set to evaluate the level of ecological risk under the condition of actual complex contamination of soils with five heavy metals (Zn, Cu, Ni, Pb, and Cd) - Scenario 1 and in the case of biosorption technology application for soil protection - Scenarios 2 and 3. Scenarios 2 and 3 differed in the type of substrate for anaerobic digestion (chicken manure and sewage sludge, respectively) compatible with phosphogypsum to obtain a biocomposite. Innovative approach for ecological risk assessment was improved based on the Bayes' theorem and developed set of qualitative and quantitative parameters. Based on the theoretical substantiation of the complex formation indicator and the fluorescent properties of digestate organic matter, the efficiency of heavy metal immobilisation in the soil was evaluated, which contributed to the reduction of ecological risk from moderate to low level for both scenarios. The results of the risk assessment based on Bayes' theorem showed a decrease in the level of risk from high to medium. Ecological and economic efficiency was assessed according to methodology of ecological damage after hostilities. The economically effective technology developed can be recommended for the comprehensive soil restoration scheme due to the obtained results.

Soil and water pollution represent significant threats to global health, ecosystems, and biodiversity. Healthy soils underpin terrestrial ecosystems, supporting food production, biodiversity, water retention, and carbon sequestration. However, soil degradation jeopardizes the health of 3.2 billion people, while over 2 billion live in waterstressed regions. Pollution of soil, air, and water is a leading environmental cause of disease, contributing to over 9 million premature deaths annually. Soil contamination stems from heavy metals, synthetic chemicals, pesticides, and plastics, driven by industrial activity, agriculture, and waste mismanagement. These pollutants induce oxidative stress, inflammation, and hormonal disruption, significantly increasing risks for non-communicable diseases (NCDs) such as cardiovascular disease (CVD). Emerging contaminants like micro- and nanoplastics amplify health risks through cellular damage, oxidative stress, and cardiovascular dysfunction. Urbanization and climate change exacerbate soil degradation through deforestation, overfertilization, and pollution, further threatening ecosystem sustainability and human health. Mitigation efforts, such as reducing chemical exposure, adopting sustainable land-use practices, and advancing urban planning, have shown promise in lowering pollution-related health impacts. Public health initiatives, stricter pollution controls, and lifestyle interventions, including antioxidant-rich diets, can also mitigate risks. Pollution remains preventable, as demonstrated by high-income nations implementing cost-effective solutions. Policies like the European Commission's Zero-Pollution Vision aim to reduce pollution to safe levels by 2050, promoting sustainable ecosystems and public health. Addressing soil pollution is critical to combating the global burden of NCDs, particularly CVDs, and fostering a healthier environment for future generations.