Ultrasonic measurement of lubricant film thickness distribution of journal bearing

Most film thickness measurement methods damage the working surface of a bearing and cannot measure the minimum film thickness, making it difficult to reveal the lubrication state and warn of wear. Two non-intrusive ultrasonic methods were proposed for measuring the film thickness distribution of the bearing, i.e., the full circumferential measurement and the prediction based on limited measuring points. The ultrasonic recognition model of film thickness was built. A film thickness measuring device and its calibration device were constructed. A calibration experiment in the range of 1-150 mu m and a measurement experiment of the bearing's film thickness distribution were carried out. The results showed that in the calibration range, the relative error of most recognition values was less than +/- 5%, and some are less than 3%. The identification accuracy of the spring model has a zoned phenomenon. The relative difference between the experimental and the simulated values of the film thickness was less than 8% under most working conditions. The predicted values of eccentricity, attitude angle, and minimum film thickness have a small difference from the simulated values, indicating that the accuracy of the measurement method is high.

成果名称:低表面能涂层

合作方式:技术开发

联 系 人:周老师

联系电话:13321314106

成果名称:低表面能涂层

合作方式:技术开发

联 系 人:周老师

联系电话:13321314106

成果名称:低表面能涂层

合作方式:技术开发

联 系 人:周老师

联系电话:13321314106

成果名称:低表面能涂层

合作方式:技术开发

联 系 人:周老师

联系电话:13321314106

润滑集