Design/methodology/approach In this paper, according to the rotation mode of ball bearings, the freestanding mode of triboelectric nanogeneration is selected to design and manufacture a novel triboelectric nanogeneration device Rolling Ball Triboelectric Nanogenerator (RB-TENG) which combines rotary energy collection with ball bearing fault self-sensing. Findings The 10,000s continuous operation experiment of the RB-TENG is carried out to verify its robustness. The accurate feedback relationship between the RB-TENG and rotation velocity can be demonstrated by the fitting comparison between the theoretical and experimental electrical signal periods at a certain time. By comparing the output electrical signals of the normal RB-TENG and the rotor spalling RB-TENG and polytetrafluoroethylene (PTFE) balls with different degrees of wear at 500 r/min, it can be concluded that the RB-TENG has an ideal monitoring effect on the radial clearance distance of bearings. The spalling fault test of the RB-TENG stator inner ring and rotor outer ring is carried out. Originality/value Through coupling experiments of rotor spalling fault of the RB-TENG and PTFE balls fault with different degrees of wear, it can be seen that when rotor spalling fault occurs, balls wear has a greater impact on the normal operation of the RB-TENG, and it is easier to identify. The fault self-sensing ability of the RB-TENG can be obtained, which is expected to provide an effective scheme for monitoring the radial wear clearance distance of ball bearings. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-08-2024-0295/